Standard Colors:
Natural and white
Size:
Thickness range: 3mm~20mm
Width: 1000mm~1500mm
Length: Any length.
Surface: glossy.
Test Report
|
Product Name |
HDPE sheet |
|||
|
Testing Item |
Standard Requirement |
Testing Result |
||
|
1 |
Exterior |
Impurities and maculas on Surface |
No diameter to exceed 1 mm of impurities and maculas allowed. Within 0.5m×0.5m, Impurities and maculas are no more than five that the diameter is smaller than 1 millimeter. |
Comply |
|
Ripples on Surface |
Not allowed obvious ripples to be existed |
Comply |
||
|
Flutes on surface |
Not allowed |
Comply |
||
|
The concaves and convexes on surface |
Not allowed the serious concaves and convexes to be existed; no more than five 4mm×4mm concaves and convexes to be existed within one square meter, and net form distributed |
Comply |
||
|
The dirty traces on surface |
Not allowed |
Comply |
||
|
The scratched traces on surface |
Allowed tender hand felt scratched traces to be existed, but it not allowed to be net form |
Comply |
||
|
Stripes on the surface |
Not allowed obvious stripes to be existed |
Comply |
||
|
Chromatism |
No chromatism allowed in the same line |
Comply |
||
|
2 |
Density : g/cm3 |
0.94~0.96 |
0.956 |
|
|
3 |
Tensile strength/ MPa |
In length≥22 |
24.8 |
|
|
In breadth≥22 |
25.6 |
|||
|
4 |
Notch impact strength/ KJ/ m2 ≥18 |
In length≥18 |
20.7 |
|
|
In breadth≥18 |
19.5 |
|||
|
5 |
Longitudinal dimension change rate |
≤35 |
30 |
|
Characteristics
Light weight, non-toxic;
High abrasion resistance;
Good chemical resistance;
Excellent impact strength;
Low co-efficient of friction;
Very good welding and processing properties;
Excellent chemical and corrosion resistance;
Material will not chip, crack, peel or break;
Vacuum and heat formable grades available lightweight ,non-toxic
Applications
1.Construction materials for chemical, mechanical and food industry e.g.
2.Tanks and Vessels boat accesssories
3.Food cutting boards,playground strucures lab equipment, plating Barresl,machined parts and so on.
4.Chemical containers, medicine and food packaging;
5.Gas transportation, water supply,drainage, agricultural irrigation;
6.Clean room, semiconductor plant and related industrial equipment;
Hot Tags: hdpe white sheet, China hdpe white sheet manufacturers, suppliers, factory, HDPE Blue Sheet, HDPE Green Sheet, HDPE Natural Sheet, HDPE Rigid Plate, HDPE Rigid Sheet, Polyethylene Board
